Home /
Water Purification System
/ Ultrapure Water Purification System
/ Synthesizing Ultrapure Water System WPS65-012FV
Synthesizing Ultrapure Water System WPS65-012FV
Ultrapure water system is sub-economic choice for high grade experiments. This level of purification is required for advanced analytical techniques, such as HPLC, and is commonly used for semi-conductor manufacturing.
Used in Laboratory, Manufacturing, Reefkeeping, Aquarium, Laboratory, Research
Also known as Laboratory Ultrapure water system
- Double stage reverse osmosis technology.
- With tap water inlet, to produce double stage RO water and ultrapure water,quality can reach to18.2 MΩ.cm.
- Built-in 5.8 liters PE tank and 10 liters airtight plastic pressure water tank.
- Built-in 1st stage RO pump,2nd stage RO pump and circulating sanitizing pump.
Features
- Double stage reverse osmosis technology.
- With tap water inlet, to produce double stage RO water and ultrapure water,quality can reach to18.2 MΩ.cm.
- Built-in 5.8 liters PE tank and 10 liters airtight plastic pressure water tank.
- Built-in 1st stage RO pump,2nd stage RO pump and circulating sanitizing pump.
- Unique design and easy-to-replace cartridges pack unit.
- Data storage and RS 232/USB communication port.
- 3 way on-line water quality sensor,multiple alarm.
- Life-span of cartridges' display and alarm.
- System circulation function,system sterilization procedure.
- The graphic display clearly indicates all system's parameters. From water quality to knowing when it is time to change the purification pack,you'll see at a glance what is need.
- For ease-of-use,the main purification technologies are contained in an innovative all-in-one pack that mean you can change it in just a couple of minutes.
- The system requires no special installation,connect the system to your tap water supply it's ready to use.
Specifications
| Feed Water Requirements*: | |
| Water Inlet | Tap water |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0 Kgf/cm² |
| Bacteria | <0.1 cfu/ml |
| DimensionLxWxH | 545x470x610 mm |
| Weight | 20 kg |
| Power Consumption (W) | 240 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The quality of output water accords with the quality of inlet water. |
| Ultrapure Water Quality: | |
| Heavy Metal Ion | <0.1 ppb |
| Endotoxin | <0.001 EU/ml |
| Rnases | <0.01 ng/ml |
| Dnases | <4pg/µl |
| Feed Water Requirements: | |
| Output | 12 L/hrs at 25°C |
| Flow rate (with pressure tank) | >1.5 L/min |
| Resistivity (25°C) | 18.2 MΩ.cm |
| TOC* | 3 ppb |
| Particle (>0.1µm) | <1/ml |
| Conductivity of 2 stage RO water | 1-5µs/cm* |