Multi-parameter Analyzer MET61-600
Multi-parameter Analyzer simultaneously measures Ion, Conductivity, Dissolved Oxygen, Temperature that otherwise requires four different meters. With the appropriate probes installed, it can also simultaneously measure several or one parameters.
Features
Specifications
| pH: | |
| Range | - 5 to 130 ºC |
| Resolution | 0.1 |
| Accuracy | ± 0.1 |
| Calibration Points | Air-saturated water or zero point |
| Standard Customization | Yes |
| Standard Recognition | 146.5 μS/cm, 1408 μS/cm, 12.85 mS/cm, 111.3 mS/cm |
| Slope Limit | Yes |
| mV/ORP: | |
| EH ORP Mode | Yes |
| ORP Calibration Points | 1~2 custom point (relative mV) |
| pX: | |
| ISE: | |
| Unit | ºC, |
| Conductivity: | |
| Reference Temperature | 5, 10, 15, 18, 20, 25 ºC |
| Resistivity: | |
| TDS: | |
| Salinity: | |
| Type | NaCl % |
| Dissolved Oxygen Concentration: | |
| Sensor Type | Polarographic |
| Calibration Reminder | Yes |
| Barometric Compensation | Yes |
| Manual Salinity Factor Correction | Yes |
| % Saturation: | |
| Saturation: | |
| Temperature: | |
| Measurement: | |
| Reading Mode | AutoRead( Fast, Medium, Slow), Timed, Continuous |
| Reading Prompts | Reading, Stable, Locked |
| Temp. Compensation | ATC, MTC |
| Data Management: | |
| Data Storage | 1000 Groups |
| GLP Features | Yes |
| Log Management | Yes |
| Inputs: | |
| pH Electrode | BNC(Q9) |
| Temp./DO Probe | 6-pin MiniDIN |
| Temp./EC. Probe | 8-pin MiniDIN |
| Outputs: | |
| USB，RS 232 | USB 2.0 flash memory device, printer, PC |
| Display Options: | |
| Backlight | Yes |
| Auto Shut-down | 1~60 min, off |
| IP Rating | IP54 |
| Date and Time | Yes |
| General: | |
| Power | AC Adapter, 100-240 V AC input, DC24V output |
| Dimensions | 280×280×130 mm |
| Weight | 2500 g (5.51 lb) |