Multi-parameter Analyzer MET61-275
Multi-parameter Analyzer simultaneously measures Ion, Conductivity, Dissolved Oxygen, Temperature that otherwise requires four different meters. With the appropriate probes installed, it can also simultaneously measure several or one parameters.
Features
Specifications
| pH: | |
| Range | - 10 to 135 ºC, 14 to 275 ºF |
| Resolution | 0.1 |
| Accuracy | ± 0.1 |
| Calibration Points | Air-saturated water or zero point |
| Standard Customization | Yes |
| Calibration Reminder | Yes |
| Standard Recognition | 10 μS/cm, 84 μS/cm, 500 μS/cm, 1413 μS/cm; 12.88 mS/cm |
| Slope Limit | Yes |
| mV/ORP: | |
| EH ORP Mode | Yes |
| ORP Calibration Points | 1 custom point (relative mV) |
| pX: | |
| ISE: | |
| Unit | ºC, ºF |
| Conductivity: | |
| Reference Temperature | 5, 10, 15, 18, 20, 25 ºC |
| Resistivity: | |
| TDS: | |
| Salinity: | |
| Type | NaCl % |
| Dissolved Oxygen Concentration: | |
| Sensor Type | Polarographic |
| Barometric Compensation | Yes |
| Manual Salinity Factor Correction | Yes |
| % Saturation: | |
| Temperature: | |
| Measurement: | |
| Reading Mode | AutoRead( Fast, Medium, Slow), Timed, Continuous |
| Reading Prompts | Reading, Stable, Locked |
| Temp. Compensation | ATC, MTC |
| Data Management: | |
| Data Storage | 1000 Groups |
| GLP Features | Yes |
| Log Management | Yes |
| Inputs: | |
| pH Electrode | BNC(Q9) |
| Temp./DO Probe | 4-pin aviation connector |
| Temp./EC Probe | 5-pin aviation connector |
| Outputs: | |
| USB | USB 2.0 flash memory device, PC |
| RS 233 | printer、scanner、autosampler |
| Display Options: | |
| Backlight | Yes |
| Auto Shut-down | 1~60 min, off |
| IP Rating | IP54 |
| Date and Time | Yes |
| General: | |
| Power | AC Adapter, 100-240 V AC input, DC24V output |
| Dimensions | 220x195x68 mm |
| Weight | 950 g（2.09 lb） |