Multi-parameter Analyzer MET61-110
Multi-parameter Analyzer simultaneously measures Ion, Conductivity, Dissolved Oxygen, Temperature that otherwise requires four different meters. With the appropriate probes installed, it can also simultaneously measure several or one parameters.
Features
Specifications
| pH: | |
| Range | - 5 to 110 ºC, 23 to 230 ºF |
| Resolution | 0.1 |
| Accuracy | ± 10.0 % |
| Calibration Points | Air-saturated water or zero point |
| Standard Customization | Yes |
| Standard Recognition | 84 μS/cm, 1413 μS/cm; 12.88 mS/cm |
| mV: | |
| pX: | |
| ISE: | |
| Unit | ºC, ºF |
| Conductivity: | |
| Reference Temperature | 20, 25 ºC |
| Resistivity: | |
| TDS: | |
| Salinity: | |
| Dissolved Oxygen Concentration: | |
| Sensor Type | Polarographic |
| Barometric Compensation | Yes |
| Manual Salinity Factor Correction | Yes |
| Saturation: | |
| Temperature: | |
| Relative Accuracy | ± 0.2 |
| Measurement: | |
| Reading Mode | AutoRead( Fast, Medium, Slow), Timed, Continuous |
| Reading Prompts | Reading, Stable, Locked |
| Temp. Compensation | ATC, MTC |
| Data Management: | |
| Data Storage | 1000 results each |
| GLP Features | Yes |
| Inputs: | |
| pH Electrode | BNC(Q9) |
| Temp./DO Probe | 4-pin aviation connector |
| Temp./EC. Probe | 5-pin aviation connector |
| Outputs: | |
| USB | USB 2.0 flash memory device, PC,scanner |
| Display Options: | |
| Backlight | Yes |
| Auto Shutdown | 300, 600, 1200, 1800, 3600 sec, off |
| IP Rating | IP65 |
| Yes | General: Power |
| General: | |
| Dimensions | 90x255x40 mm |
| Weight | 500 g（1.1 lb） |