Bacti-cinerator Sterilizer STE12-825
Bacti-Cinerator sterilizer is a gasless, flameless sterilizer for use with inoculating loops and needles. Sterilization is accomplished through infrared heat without dangerous spattering of microorganisms. Safely sterilizes loops and needles by infrared heat.
Used in Suction fans and mobile vehicles
Also known as Laboratory autoclave, Laboratory sterilizer, Steam sterilizer
- Based on the principle of electronic infrared, the products are widely used in the sterilization of inoculation needles, completely replacing alcohol lamps.
- The temperature inside the heating hole can reach 800°C or above, sterilization takes only 5-7 seconds and sterilization is thorough. The product can be used in an anaerobic chamber.
- Small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation.
- Organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination.
Features
- Based on the principle of electronic infrared, the products are widely used in the sterilization of inoculation needles, completely replacing alcohol lamps.
- The temperature inside the heating hole can reach 800°C or above, sterilization takes only 5-7 seconds and sterilization is thorough. The product can be used in an anaerobic chamber.
- Small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation.
- Organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination.
- Precise temperature control technology, avoid the heating components work overload, long life.
Specifications
| Center Max. Temp | 825°C±50°C |
| Low Level Temp. | 480°C |
| Heating Speed | 20min(to max. Temp.) |
| Max. Sterilize Diameter | Φ14mm |
| Heating Element Length | 140mm |
| Adjustable Angle | 75°~120° |
| Voltage | AC 220V/AC 110V, 50/60Hz |
| Power | 230W |
| Fuse | 250V,2A/3A, Φ5x20 |
| Dimension | W.87xD.151xH.160mm |
| Net Weight | 1kgs |